Contact Current Measurement; Fuse Replacement; Return And Environmentally Sound Disposal; Repair And Replacement Parts Service, Calibration Center And Rental Instrument Service - Gossen MetraWatt PROFITEST PRCD Operating Instructions Manual

⏐
PROFI
RCD

8.2.3 Contact Current Measurement

The measurement of contact current is per-
formed on the screw connections of the PRCD IN
sockets with standard limit values (I
8.3

Fuse Replacement

All fuses for neutral and phase conductors
are accessible from the outside.
The fuses may only be replaced when the
instrument is voltage-free, i.e. the instrument
must be disconnected from mains supply
power and may not be connected to a mea-
suring circuit. The respective fuse type must
comply with the specifications in the techni-
cal data or the labeling on the device.
N L
8.4 Return and Environmentally Sound
Disposal
The device is a category 9 product (monitor-
ing and control instrument) in accordance
with ElektroG (German electrical and elec-
tronic device law).
This device is subject to the RoHS directive.
Furthermore, we make reference to the fact
that the current status in this regard can be
accessed on the Internet at
Edited in Germany • Subject to change without notice • PDF version available on the Internet
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg Germany
•
< 0.5 mA).
B
L3 L2 L1
Phone: +49 911 8602-111
Fax:
e-mail: info@gossenmetrawatt.com
www.gossenmetrawatt.com
www.gossenmetrawatt.com by entering the
search term WEEE.
In accordance with WEEE 2012/
19/EU and ElektroG, we identify
our electrical and electronic
devices with the symbol in accor-
dance with DIN EN 50419 which is shown at
the right. Devices identified with this symbol
may not be disposed of with the trash.
Please contact our service department
regarding the return of old devices (see
address next page).
9 Repair and Replacement Parts
Service, Calibration Center and
Rental Instrument Service
If required lease contact:
GMC-I Service GmbH
Service Center
Beuthener Straße 41
90471 Nürnberg
Phone: +49-911-817718-0
Fax: +49-911-817718-253
e-mail service@gossenmetrawatt.com
www.gmci-service.com
This address is only valid in Germany.
Please contact our representatives or sub-
sidiaries for service in other countries.
10

Product Support

If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone: +49-911-8602-0
Fax: +49 911 8602-709
e-mail: support@gossenmetrawatt.com
+49 911 8602-777
Maintenance – Addresses
Germany
•