Table of Contents
Advertisement
1. Lubricate the O-ring in acid-free grease or Vaseline.
2. Check that the O-ring is placed correctly in the recess of the new
electrode.
3. Check that the hole for the electrode in the pHix® Compact is completely
dry – if necessary use a dry cloth.
4. Screw in the new electrode and tighten by hand. Note! Do not use tools!
5. Finally, pHix® Compact must be
commissioning.
24
buffer adjusted
11
MANUAL
EN 4.10 pHix® Compact 1904
prior to
Advertisement
Table of Contents
