Time Functions Programming - DoorKing 1803 Installation & Owner's Manual

3.4 Time Functions Programming

3.4.1 Programming Time Clock
This programming sequence programs the calendar chip in the telephone entry system for the current time and date. The
calendar chip MUST be programmed if you are going to use any of the time functions available with the entry system.
3 3
1. Press and enter your four-digit MASTER CODE
2. Enter the four-digit current hour and minutes, then press
DO NOT use military (24 hour) time format, simply enter the hour (2 digits) and the minutes (2 digits). For example, 8:30 is
entered as 0830. AM or PM gets set on the next step.
3. Press 0 (beep) for AM, OR
4. Enter the two-digit month, then press
5. Enter the two-digit day of the month, then press
6. Enter the two-digit year, then press
7. Enter the single-digit day of the week (Sun = 1, Mon = 2, .....Sat = 7) then press
3.4.2 Automatic Relay Activation Time Zones
This program sequence sets up to FOUR time zones to automatically activate and deactivate the relays on the control board.
Each relay can be programmed with TWO independent time zones.
Time zones 1 and 2 controls Relay 1 operation ONLY.
Time zones 3 and 4 controls Relay 2 operation ONLY.
Use the chart in the log tables in back of this manual to record the time zones that are programmed. These time zones can be
independently turned ON or turned OFF after they have been programmed (see operating instructions 4.2.5 to turn ON or OFF
the programmed time zones).
3 5
1. Press and enter your four-digit MASTER CODE
2. Enter a single-digit time zone number (1 or 2 = relay 1, 3 or 4 = relay 2), then press
1
3. Press (beep) to turn time zone ON, OR
4. Enter the four-digit BEGINNING hour and minutes, then press
DO NOT use military (24 hour) time format, simply enter the hour (2 digits) and the minutes (2 digits). For example, 8:30 is
entered as 0830. AM or PM gets set on the next step.
5. Press 0 (beep) for AM, OR
6. Enter the four-digit ENDING hour and minutes, then press
DO NOT use military (24 hour) time format, simply enter the hour (2 digits) and the minutes (2 digits). For example, 8:30 is
entered as 0830. AM or PM gets set on the next step.
0
7. Press (beep) for AM, OR
8. Enter the seven-digit days of the week, then press
All seven digits MUST be entered, to skip any days of the week the time zone will NOT be active, enter # in place of a day.
Example 1, to have a time zone active on Saturday and Sunday ONLY (Sun = 1, Sat = 7), enter 1 7 # # # # #.
Example 2, to have a time zone active on Monday thru Friday ONLY (Mon = 2, Tues = 3, ......Fri = 6), enter 2 3 4 5 6 # #.
9. Repeat steps 2 through 8 to enter additional time zones.
0
10. Press together to end this programming sequence (beeeeeep).
38
?
(beep).
1 (beep) for PM.
(beep).
(beep).
(beep).
?
0
(beep) to turn time zone OFF.
1 (beep) for PM.
(beep).
1
(beep) for PM.
(beeeeeep). (Sun = 1, Mon = 2, .....Sat = 7)
? ? ?
(beep).
(beeeeeep).
? ? ?
(beep).
(beep).
(beep).
1800-060 Issued 7-19
Version A