Baoding Shenchen F Series Manual page 9

Shenchen Pump
Click the System Setting button on the main interface, click Suck-back Angle
button, enter suck-back angle setting interface. Click Set Suck-back Angle button,
the numerical keyboard will come out, input the suck-back angle and click
'Confirm' button, all the filling unit will work with this angle. Click 'Cancel'
button back to the system setting interface.
4.6.Common Mode Interface
Common Mode Interface as below： ：
《
Click System Setting button on the main interface, click Common Mode button,
enter choose common mode interface.
 Add Button: Click this button to add one common mode, in dispensing
mode .click ADD button to pop up and dialog box to ask if to add the curent
setting to common mode.Clike YES to add this mode. It can totally save 60
modes.
！
Back Suction angle
range: 0~360
Settings can raise the
dispensing accuracy,
Please re-calibrate the
flow rate.
PumpHead Tube Disp. Vol.
YZ1515x 14#
16#
YZ1515x
Add
Dec.
Please enter back suction angle
360.00
OK Cancel
Disp. Time Pause Time
2 1 2
7
1 2
Clear OK
- 6 -
Suck-Back
0
0
》
Cancel
F Series