Advertisement
Table of Contents
- 1 Table of Contents
- 2 F Series Product Introduction
- 3 F Series Product Appearance
- 4 F Series Keypad Instruction
- 5 F Series Interface Composition
- 6 External Control Interface Instruction
- 7 F Series Technical Specification
- 8 F Series Function and Features
- 9 Product Dimension
- 10 Warranty and after Sales Service
- Download this manual
Advertisement
Table of Contents
Related Manuals for Baoding Shenchen F Series
Summary of Contents for Baoding Shenchen F Series
- Page 1 Shenchen Precision Pump Manual of F series...
- Page 2 Important Information Please read the manual carefully before operating the product. Warning Tubing may have crack due to wear. It results in the overflow of fluid from tubing. In that time human body and instruments may be damaged. So user must check usually and change tubing in time.
-
Page 3: Table Of Contents
3. F Series Keypad Instruction………………………………………...………-2- 4. F series Interface Composition……………………………………...……...-2- 5. External Control Interface Instruction ……………………………………-10- 6. F Series Technical Specification…………………………………………..-14- 7. F Series Function and Features……………………………………………-15- 8. Product Dimension………………………………………………………...-16- 9. Product Maintenance ……………………………………..………………-18- 10. Warranty and After Sales Service………………………...……………….-19-... -
Page 4: F Series Product Introduction
Shenchen Pump F Series F Series Product Introduction F series of peristaltic pump, with 4.3 inch color touch screen control, graphical interface, animation display working status, with the screen display filling parameters and system settings, attention to user experience, suitable for pollution-free, high-precision filling liquid, filling accuracy up to 0.5 %-1%. -
Page 5: F Series Keypad Instruction
Full Speed Button: Press this button at the stop state, the filling unit will running with 400rpm. This button is for washing tube and filling liquid rapidly. CW/CCW Button: Press this button, the motor will change running direction. 4. F Series Interface Composition MAIN System Set Calibration Monitoring Disp. - Page 6 Shenchen Pump F Series F Series Operation Interface Instruction: 4.1.Booting Interface： After power on the system, enter the welcome interface, Click anywhere or wait for 2.5 seconds, the system will automatically enter the English main interface. 4.2.Main Interface： Main Interface Composition as below: 2012-3-15 8:45:05 AM 00.00...
- Page 7 Shenchen Pump F Series reach the limit, both data will back to zero. Also can set the data back to zero in the system setting. D. Set Parameter Display: This area display current working state, pump head, tubing size and suck-back angle...
- Page 8 Shenchen Pump F Series On the main interface, click System Setting button, click Configuration button, enter Configuration interface. Click Pump Head, Tube Size drop-down menu choose pump head and tube. Reference flow rate display the minimum and maximum flow rate of the pump head and tube.
- Page 9 Shenchen Pump F Series ！ Please enter back suction angle Back Suction angle range: 0~360 360.00 Settings can raise the dispensing accuracy, Please re-calibrate the flow rate. Cancel Click the System Setting button on the main interface, click Suck-back Angle button, enter suck-back angle setting interface.
- Page 10 Shenchen Pump F Series Delete Button： Choose one common button, click Delete button, it will ask whether delete, click ‘YES’, then you can delete this mode. Clear Button： Click this button, it will ask whether clear all data, click ‘YES’, then empty all the common mode.
- Page 11 Shenchen Pump F Series Actual Vol. Volume Adjustment 0.0000ml +0.0000ml Disp. Vol. 10.00 Test Disp. Time 1.00 1.00 Cancel Click ‘ Calibration’ button in main interface, enter flow rate calibration interface. In dispensing mode, calibration interface data: dispensing volume and dispensing time is the data set in main interface before.
- Page 12 Shenchen Pump F Series forbidden. C) Click Add or Dec button to adjust the dispensing volume. Click ‘Reset’ button, the data back to factory default data. 4.9. Real-time Monitor Interface A. Dispensing model Monitor Interface as below： ① ② CW/CCW ③...
-
Page 13: External Control Interface Instruction
Shenchen Pump F Series 12-hour 2012-3-15 24-hour 8:45:35 AM Set Date Thursday Set Time Back Click Date and Time display in the main interface, enter the date and time setting interface. Click Set Date button, the numerical keyboard come out, input the Year, setting year range is 1970-2099. - Page 14 Shenchen Pump F Series VDC) If need change to 24VDC or 12VDC input, please open the controller housing, and change the jumper connection on the external control board as below : The signal recognition is rising edge effective, the minimum duration of the high level is 200ms.
- Page 15 Shenchen Pump F Series External control diagram as below: A. Disconnect K1 after short connect, the motor start working, disconnect again after short connect , pump pause working. Short connect K3, the pump working with full speed. Disconnect, pump back to previous working status.
- Page 16 Shenchen Pump F Series If it is an external relay, when the motor is running, K1 is closed, and when it stops, K1 is disconnected. RS232 communication port: Select RS232 in the communication setting interface, this port is valid. GND: Communication ground terminal.
-
Page 17: F Series Technical Specification
Shenchen Pump F Series 6. F Series Technical Specification AC 220V± 10% 50Hz/60Hz （standard） Dispensing Volume Range 0.1-9999.99ml Power supply AC 110V± 10% 50Hz/60Hz （option） External Dispensing Time Range 0.5-9999.99s Start/Stop signal Control Communicatio Pause Time Range 0.5-9999.99s RS232/RS485 Dispensing Volume 0.01ml... -
Page 18: F Series Function And Features
Shenchen Pump F Series 7. F Series Function and Features Accurate angle control technology for high precision filling. Color screen touch control, friendly interface, animation display filling status, same screen display filling parameters and system settings. Intelligent calibration function to calibrate the filling volume before production to ensure filling accuracy. -
Page 19: Product Dimension
Shenchen Pump F Series 8. Product Dimension ( Unit: mm) F1/F3/F6 dimension drawing as below: F6-3L dimension drawing as below: - 16 -... - Page 20 Shenchen Pump F Series F6-6L dimension drawing as below: F6-12L dimension drawing as below: - 17 -...
- Page 21 Shenchen Pump F Series 9. Maintenance When the pump is not working, loosen the tubing, avoid the tubing get plastic deformation because of long time pressure. The pump drive and pump head do not resist strong corrosive liquids, please pay attention to this when use the pump.
-
Page 22: Warranty And After Sales Service
Shenchen Pump F Series 10. Warranty and After Sales Service We support three years warranty (do not include tubing). During the warranty, the pump is damaged by wrong operation or man-made sabotage, our company do not responsible for warranty. If the product out of warranty, we only charge cost for the replacement parts and shipping cost. - Page 23 Shenchen Pump F Series...
- Page 24 Shenchen Pump F Series MADE IN CHINA Baoding Shenchen Precision Pump Co., Ltd. Address: No.103, Building 2, ZhiDian Industrial Park, FuXing East Road 999, Baoding, China. Tel: 0086-312-6780681, 6780680 Fax: 0086-312- 6780636 Website: www.good-pump.com Email: info@good-pump.com...