Baoding Shenchen F Series Manual page 10

Shenchen Pump
 Delete Button： Choose one common button, click Delete button, it will ask whether
delete, click 'YES', then you can delete this mode.
 Clear Button： Click this button, it will ask whether clear all data, click 'YES', then
empty all the common mode.
 Selecting Button: Choose one of the common mode, click 'OK' button, then it will
back to the main interface. The filling parameter is same as the one you chose
from the common mode.
 Cancel Button: Click this button back to the system setting interface.
 Page Up/Down Button: Can check previous page or next page common mode.
4.7 Communication Settings Interface
The communication setting interface as below;
Click 'System Setting' button in main interface, click 'Communication setting'
button,enter communication setting interface. Users can select baud rate and
communication interface RS232/RS485. Local address can be any number between
1 and 32.
4.8 Flow Calibration Interface
Flow Calibration Interface as below
：
- 7 -
F Series