F Series Keypad Instruction; F Series Interface Composition - Baoding Shenchen F Series Manual

Shenchen Pump
3.

F Series Keypad Instruction

System Set
PumpHead
&Tube

Run/Pause Button：In dispensing mode, after setting the dispensing data,
press run/pause button, the pump start work; press run/pause button again,
pause the current working. After press the run/pause button, except calibration
and monitor button all other buttons on main interface become gray, can not be
used.
In transferring mode, press run/pause button, pump start working, now it do
not have pause function.(In system setting interface, users can select working
mode: dispensing mode or transferring mode. )

Stop Button：Press stop button, stop working. Forbidden buttons can be used
on the main interface.

Full Speed Button: Press this button at the stop state, the filling unit will
running with 400rpm. This button is for washing tube and filling liquid
rapidly.

CW/CCW Button: Press this button, the motor will change running direction.

4. F Series Interface Composition

System Set
PumpHead
&Tube
Calibration Monitoring
Suck-Back
Common
Angle
Mode
Add
Mode
Calibration Monitoring
Suck-Back
Common
Angle
Mode
Add
Mode
MAIN
Disp. Vol. Disp. Vol.
Date
&Time
MAIN
Disp. Vol. Disp. Vol. Disp. Time
Date
&Time
- 2 -
F Series
Disp. Time Pause Time
Pause Time