1. Manuals
  2. Brands
  3. Smith & Noble Manuals
  4. Racks & Stands
  5. Metro Track Flat Aluminum Hardware
  6. Installation instructions manual

Smith & Noble Metro Track Flat Aluminum Hardware Installation Instructions Manual

Wall mount return single rod set
Hide thumbs Also See for Metro Track Flat Aluminum Hardware:
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Warranty Service
The enjoyment of your hardware should be everlasting, which is why our products
come with a limited lifetime warranty. The warranty applies to the original owner,
requires a proof of purchase (hang on to your receipt!) and covers defects in material
or craftsmanship. Hardware must have been properly installed. We reserve the right to
determine if your hardware warrants a repair or a replacement. Visit smithandnoble.
com/guarantee to see full details. In need of warranty service? Call us at 800.248.8888
and we'll arrange for a repair or replacement ASAP.
© 2019 Smith & Noble Home, Inc. All Rights Reserved
STEP BY STEP INSTALLATION INSTRUCTIONS
Metro Track
Flat Aluminum
Hardware
SN0419
Wall Mount
Return Single Rod Set

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Metro Track Flat Aluminum Hardware and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Smith & Noble Metro Track Flat Aluminum Hardware

Summary of Contents for Smith & Noble Metro Track Flat Aluminum Hardware

  • Page 1 STEP BY STEP INSTALLATION INSTRUCTIONS Metro Track Flat Aluminum Hardware Warranty Service The enjoyment of your hardware should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase (hang on to your receipt!) and covers defects in material or craftsmanship.

  • Page 2: Table Of Contents

    Everything Table of Contents You Need Getting Started ........3 Step 1 - Wall Mount Return Single Rod Set .

  • Page 3: Step 1 - Getting Started

    STEP 1 - GETTING STARTED OVERVIEW Getting Started Wall Mount Return Single Rod Set Before you begin, check the accompanying diagram to make sure you have all the parts you need. You’ll need to make sure the surface you intend to install your hardware is sturdy enough to accommodate the brackets.

  • Page 4: Step 2 - Mounting The Brackets

    STEP 2 - MOUNTING BRACKETS STEP 2 - MOUNTING BRACKETS Place center of bracket cover plate Mounting the Brackets level against wall at the marked Figure A spots. Using a pencil, lightly draw a circle around the base of the Place the panel on the rod.

  • Page 5: Step 3 - Attaching The Rod Connector

    STEP 4 - PLACING CARRIERS & END STOPS STEP 3 - ATTACHING THE ROD CONNECTOR Adding or Removing Carriers to the Rod Depending on your order, you may have CARRIERS Your track rod will come with all master ROD CONNECTOR received a rod connector.

  • Page 6: Step 5 - Attaching Bracket To Posts

    STEP 5 - ATTACHING BRACKET POSTS STEP 7 - ATTACHING BRACKET POSTS TO BRACKET BASES Insert the mounting posts into the MOUNTING POST CHANNELS Align the mounting posts in the back of channel in the back of the track. MOUNTING the track with the brackets mounted to Do not tighten at this time.

  • Page 7: Step 9 - Attaching Drapery To Rod

    STEP 8 - ATTACHING DRAPERY TO ROD ACCESSORIES Baton/Wand (optional) Insert drapery pin hooks into carriers and master carriers. CLIP Baton/Wand will be pre-attached to the master carrier(s). Split Drapery For Split drapery, start pining from MASTER DRAPERY CARRIERS CARRIER PINS the center and go towards the ends.

  • Page 8: Care & Cleaning

    CARE & CLEANING NOTES Minimal care and cleaning is needed to maintain the beauty of your Hardware. To Vacuum: Use brush or dust head attachment. To Dust: Use soft, clean cloth. smithandnoble.com 800.248.8888...

Table of Contents