1. Manuals
  2. Brands
  3. Smith & Noble Manuals
  4. Racks & Stands
  5. Metro Track Flat Aluminum Hardware
  6. Installation instructions manual

Smith & Noble Metro Track Flat Aluminum Hardware Installation Instructions Manual

Wall mount double rod set
Hide thumbs Also See for Metro Track Flat Aluminum Hardware:
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Warranty Service
The enjoyment of your hardware should be everlasting, which is why our
products come with a limited lifetime warranty. The warranty applies to the
original owner, requires a proof of purchase (hang on to your receipt!) and
covers defects in material or craftsmanship. Hardware must have been properly
installed. We reserve the right to determine if your hardware warrants a repair
or a replacement. Visit smithandnoble.com/guarantee to see full details. In
need of warranty service? Call us at 800.248.8888 and we'll arrange for a repair
or replacement ASAP.
© 2019 Smith & Noble Home, Inc. All Rights Reserved
STEP BY STEP INSTALLATION INSTRUCTIONS
Metro Track
Flat Aluminum
Hardware
SN0419
Wall Mount
Double Rod Set

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Metro Track Flat Aluminum Hardware and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Smith & Noble Metro Track Flat Aluminum Hardware

Summary of Contents for Smith & Noble Metro Track Flat Aluminum Hardware

  • Page 1 STEP BY STEP INSTALLATION INSTRUCTIONS Metro Track Flat Aluminum Hardware Warranty Service The enjoyment of your hardware should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase (hang on to your receipt!) and covers defects in material or craftsmanship.

  • Page 2: Table Of Contents

    Everything Table of Contents You Need Getting Started ........3 Step 1 - Wall Mount Double Rod Set .

  • Page 3: Step 1 - Getting Started

    STEP 1 - GETTING STARTED OVERVIEW Tools & Parts Metro Track Flat Aluminum Double Rod Set Before you begin, check the accompanying diagram to make sure you have all the parts you need. You’ll need to make sure the surface you intend to install your hardware is sturdy enough to accommodate the brackets.

  • Page 4: Step 2 - Mounting The Brackets

    STEP 2 - MOUNTING BRACKETS STEP 2 - MOUNTING BRACKETS Mounting the Brackets Mounting the Brackets FIGURE A Place the panel on the rod. To en- Place center of bracket cover plate sure it drapes at the correct length, level against wall at the marked hold it up to the spot you wish to spots.

  • Page 5: Step 3 - Attaching The Rod Connector

    STEP 3 - ATTACHING THE ROD CONNECTOR STEP 4 - ADDING OR REMOVING CARRIERS Front Rod Depending on your order, you may Your track rod will come with all master ROD CONNECTOR CARRIERS have received a rod connector. carriers and regular carriers pre-installed. If you need to add or take out some A rod connector is the short piece of carriers depending on your drapery,...
  • Page 6 STEP 4 - ADDING OR REMOVING CARRIERS STEP 4 - ADDING OR REMOVING CARRIERS MASTER CARRIERS FRONT FRONT ROD Back Rod Back Rod CARRIER FINIAL SPLIT DRAPERY (A) Your track rod will come with all master END CAP carriers and regular carriers pre-installed. Once all carriers have been placed in the A Split Draw If you need to take add or take out some...

  • Page 7: Step 5 - Attaching Bracket Posts

    STEP 5 - ATTACHING BRACKET POSTS STEP 6 - ATTACHING FINIALS MOUNTING MOUNTING END CAP FINIALS CHANNEL Insert the mounting posts into the POST BRACKET Slide in End Cap onto rod and tighten set screw. channel in the back of the track. Do not tighten at this time.

  • Page 8: Step 7 - Attaching Back Rod Clips

    STEP 7 - ATTACHING BACK ROD CLIPS STEP 8 - ATTACHING BRACKET POSTS TO BRACKET BASES 1. Assemble Back Rod Clips for Outside Posts. Attaching Bracket Posts to Bracket Bases Align the mounting posts in the back of the track with the brackets mounted to the wall. Slide the mounting posts onto the brackets 2.

  • Page 9: Step 9 - Attaching Back Rod

    STEP 9 - ATTACHING BACK ROD STEP 10 - ATTACHING DRAPERY TO ROD Place the front lip of the track into the front Insert drapery pin hooks into carriers and master carriers. edge of the clip. Split Drapery Rotate the back of the track up into the clips For Split drapery, start pining from the and snap DRAPERY...

  • Page 10: Care & Cleaning

    ACCESSORIES CARE & CLEANING Baton/Wand (optional) Minimal care and cleaning is needed to maintain the beauty of your Hardware. Baton/Wand will be pre-attached to the To Vacuum: Use brush or dust head attachment. master carrier(s). To Dust: Use soft, clean cloth. CLIP BATON/ WAND...

Table of Contents