Adding/Deleting The Area Code; Dialing Numbers From Acaller Id Record; Storing A Caller Id Record To Memory; Deleting Caller Id Records - Sprint 2.4 GHz Digital Spread Spectrum Dual Keypad Cordless Phone with Caller ID/Call Waiting Owner's Manual

43-5522.fm Page 20 Tuesday, September 12, 2000 3:12 PM
Display
The caller is not within a
Unknown
Caller ID service area.
Name
or
Unknown
Number
Appears if there was an
Incomplete
error during the transmis-
Data
sion of Caller ID informa-
tion. Occasional errors are
normal. If the phone fre-
quently displays
plete Data
your local telephone com-
pany or RadioShack store.
ADDING/DELETING THE
AREA CODE
When the area code of the received call is
the same as the one you stored (see "Storing
Your Area Code" on Page 13), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press to add or delete the area
3
code. Pressing again deletes or adds the
3
area code.
DIALING NUMBERS FROM A
CALLER ID RECORD
To dial a local number stored in a Caller ID
record, recall the record, then press
it is a long distance call, press
before the displayed number) before you
press . If you want to add or delete the
TALK
area code, press before you press
3
Note: If a Caller ID record does not contain a
phone number (if it was blocked by the caller,
for example) you cannot dial from that
record.
20
STORING A CALLER ID
Description
RECORD TO MEMORY
Follow these steps to store the name and
number from a Caller ID record into a memo-
ry location.
Incom-
, contact
DELETING CALLER ID
RECORDS
. If
TALK
You can delete Caller ID records individually
( 1 appears
1
or all at once.
Follow these steps to delete a single Caller
.
TALK
ID record.
Caller ID Operation
1. Press then
CID VOL/CID
recall the record you want to store.
If you want to add or delete the area
code, press .
3
2. Press . Select
MEM
appears.
3. Choose a memory location (
pressing a number or by repeatedly
8 8 8 8
pressing
VOL/CID
ing
SELECT/CHANNEL
If the selected location is empty, the
phone beeps to confirm that it stored the
number, then the Caller ID record
appears.
If a record exists in the selected loca-
tion, Replace Memory?
prompting you to confirm the replace-
ment. Press
VOL/CID
the cursor to Yes or
. The phone beeps to
SELECT/CHANNEL
confirm the replacement.
1. Press then
CID VOL/CID
recall the record you want to delete.
2. Press . Delete Message?
INTCM/DEL
and Yes/No appear with the cursor
pointing to Yes .
8 8 8 8 9 9 9 9
or to
Location
– ) by
01 20
9 9 9 9
or , then press-
.
appears,
8 8 8 8 9# 9# # # # #
9# 9#
or to move
No , then press
8 8 8 8 9 9 9 9
or to