Memory Dialing - Sprint 2.4 GHz Digital Spread Spectrum Dual Keypad Cordless Phone with Caller ID/Call Waiting Owner's Manual

43-5522.fm Page 16 Tuesday, September 12, 2000 3:12 PM
When the person at the base answers, press
. The call is released from hold and
TALK
transferred to the base.
To transfer a call from the base to the hand-
set, press INTCM/PAGE . The call is put on
hold, and Paging and Hold
the person with the handset answers, press
SPEAKER . The call is released from hold and
transferred to the handset.

MEMORY DIALING

You can store up to 30 phone numbers in
memory (20 in the handset's and 10 in the
base's memory), then dial a stored number
by entering its memory location number.
You can also store a name with each number
in the handset's memory.
Use the supplied memory sticker to record
the numbers you stored in the base's memo-
ry. Peel the backing from the sticker and at-
tach the sticker to the base.
Storing a Number in the Handset's
Memory
Notes:
• The phone beeps five times exits the
storing process if you wait more than 20
seconds between each keypress.
• If you receive a call during memory
entry, the phone exits the storing pro-
cess.
1. Lift the handset.
2. Hold down until
MEM
and a list of memory location numbers
appear.
3. Press a number
(01-20
9# 9# 9# 9#
to choose a two-digit memory loca-
tion. Precede a single digit location num-
ber with 0 — 01, 02, 03, and so on.
16
4. To store a name, press
5. To enter a name, press
appear. When
6. Press
7. Enter the phone number and any tone or
8. Press
Memory Store
8 8 8 8
) or or
VOL/CID
9. When you finish, press
Telephone Operation
. Store Name appears.
NEL
If you do not want to enter a name, skip
to Step 6.
9 9 9 9
to select the characters and
to move the cursor.
Repeatedly press
VOL/CID
the characters in alphabetical order.
(The display shows uppercase letters
first, then lowercase letters, numbers,
and special characters.)
Notes:
8 8 8 8
• Press to see the charac-
VOL/CID
ters in reverse alphabetical order.
• You can hold down
VOL/CID
to scroll rapidly through the charac-
ters.
• If you make a mistake, move the cur-
sor over the error, then enter the cor-
rect character, or press
delete a character. To delete all the
characters, hold down
at least 1 second.
SELECT/CHANNEL
ber appears.
pause entries (see "Using Tone Services
on a Pulse Line" on Page 15 and "Enter-
ing a Pause" on Page 17).
SELECT/CHANNEL
beeps and Memory nn Stored
appear (nn is the location number you
selected). After 2 seconds,
Store appears. Repeat Steps 3–8 to
store more numbers.
MEM
SELECT/CHAN-
8 8 8 8
or
VOL/CID
6 6 6 6 7 7 7 7
or
9 9 9 9
to view
8 8 8 8 9 9 9 9
or
to
INTCM/DEL
for
INTCM/DEL
. Store Num-
. The phone
Memory
.