Selecting The Channel; Adjusting The Handset Volume; Using The Speakerphone; Using Redial - Sprint 2.4 GHz Digital Spread Spectrum Dual Keypad Cordless Phone with Caller ID/Call Waiting Owner's Manual

43-5522.fm Page 14 Tuesday, September 12, 2000 3:12 PM

SELECTING THE CHANNEL

The phone has 30 channels. If the call
seems to disconnect for no reason during a
call, press
SELECT/CHANNEL
to select a different channel.
pears while your phone searches for a clear
channel.
ADJUSTING THE HANDSET
VOLUME
To adjust the handset's volume during a call,
8 8 8 8 9 9 9 9
press or
VOL/CID
desired volume level. Volume Maximum
Volume High , Volume Medium
Volume Low appears.
The setting is maintained even after you
hang up the phone.
Note: When you press
VOL/CID
9 9 9 9
volume is maximum or
is low, the setting does not change and the
phone beeps three times.
USING THE
SPEAKERPHONE
To make or answer a call using the speaker-
phone, press . The SPEAKER indi-
SPEAKER
cator lights. When you hear a dial tone, dial
the number.
To set the speakerphone's volume, slide
on the right side of the base.
VOLUME
To end a speakerphone call, press
again.
Switching Between the Handset
and Speakerphone
To switch to the speakerphone while you are
using the handset, press
base. When you hear the conversation or
dial tone on the speakerphone, press
on the handset.
14
To switch to the handset while you are using
the speakerphone, simply lift the handset off
the base. If the handset is away from the
base, press
on the handset
ap-
Scanning
Using Both the Handset and
Speakerphone
If someone else is using the speakerphone,
press
versation.
If someone else is using the handset, press
SPEAKER
until you reach the
tion.
,
, or
During the call, one person can hang up and
let the call continue at the other keypad.
Or, both people can hang up at the same
time to end the call.
8 8 8 8
while the
Note: If you hear a high-pitched noise from
while the volume
the base's speaker, the handset and the
base are too close together.

USING REDIAL

You can quickly dial any of the last three
numbers you dialed on the handset. Lift the
handset and repeatedly press
until the number you want to dial appears.
Then press
number.
You can also dial the last number dialed us-
ing the speakerphone. Press
REDIAL/PAUSE
SPEAKER
Notes:
on the
SPEAKER
TALK
Telephone Operation
, then press
TALK
on the handset to join the con-
TALK
on the base to join the conversa-
and the phone dials the
TALK
on the base.
• The redial memory for each keypad is
separate. You cannot redial a number
you dialed on the handset's keypad
using on the base's key-
REDIAL/PAUSE
pad, and vice versa.
.
SPEAKER
RDL/PAUSE
then
SPEAKER