Power Button/Card Reader Board - HP 14 Series Maintenance And Service Manual

Power button/card reader board

Table 5-6 Power button/card reader board description and part number
Description
Power button/card reader board
NOTE: The power button board spare part kit does not include the cable. The cable is available as spare
part number L64887-001 in models with a 15 W processor and L64888-001 in models with a 6 W
processor.
Before removing the power button/card reader board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the power button/card reader board:
1. Disconnect the cable from the board (1).
2. Remove the Phillips M2.0 × 3.0 screw (2) that secures the board to the computer.
3. Remove the board from the computer (3).
NOTE:
Reverse this procedure to install the power button/card reader board.
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page
The following illustration shows a fanless model. Computer appearance can vary.
(Preparation for disassembly on page
27).
29).
Spare part number
L64886-001
26).