Power Connector - HP 14 Series Maintenance And Service Manual

Power connector

Table 5-15 Power connector description and part number
Description
Power connector
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the display assembly (see
Remove the power connector cable:
1. Disconnect the cable from the system board (1).
2. Remove the power connector and cable from the computer (2).
Reverse this procedure to install the power connector cable.
58 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
Display assembly on page
26).
27).
50).
Spare part number
808155-010