Table of Contents
Advertisement
e.
When installing the display panel, apply the adhesive in the location as shown in the following
illustration.
9.
If it is necessary to remove the display hinges:
a.
Remove the Phillips M2.0 × 2.5 screw (1) from the bottom of each hinge.
b.
Remove the two Phillips M2.5 × 2.5 screws (2) from the bottom of each hinge.
c.
Remove the Phillips M2.5 × 3.0 screw (2) from the top of each hinge.
Component replacement procedures
55
Hide quick links:
Advertisement
Table of Contents
