Power Button/Card Reader Board; Touchpad - HP 14 Maintenance And Service Manual

Laptop pc
Hide thumbs Also See for 14:
Table of Contents

Advertisement

Power button/card reader board

To remove the power button/card reader board, use this procedure and illustration.
Table 5-6
Power button/card reader board description and part number
Description
Power button/card reader board
Power button/card reader board
Before removing the power button/card reader board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the power button/card reader board:
1.
Disconnect the cable from the ZIF connector on the power button/card reader board (1).
2.
Remove the two Phillips M2.0 × 3.0 screws (2) that secure the board to the computer.
3.
Remove the board from the computer (3).
Reverse this procedure to install the power button/card reader board.

Touchpad

To remove the touchpad, use this procedure and illustration.
Table 5-7
Touchpad description and part number
Description
Touchpad, silver
Touchpad, white
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
31).
29).
Component replacement procedures
Spare part number
M13557-001
L64887-001
29).
Spare part number
L64897-001
L64899-001
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

14s

Table of Contents