Table of Contents
Advertisement
Optional accessories
All accessories listed in these
instructions are designed to be used
with the Miele Range Cooker.
These are available to order via the
Miele Webshop, the Miele Customer
Service Department (see end of this
booklet for contact details) or from your
Miele dealer.
When ordering, please quote the model
number of your Range Cooker and the
reference number of the accessories
required.
RBGDF wall panel for Dual Fuel
Range Cooker
Depending on the model, you can
exchange the existing edge profile on
your appliance for a taller wall panel.
The wall panel is available in the
following heights: 305 mm and 508 mm.
If installing the Range Cooker against a
wall made of flammable materials, a
wall panel that is at least 305 mm high
must be fitted. If you do not wish to
replace the existing edge profile, the
Range Cooker must be installed with a
gap of at least 305 mm between it and
the wall made of flammable materials.
Fitting the RBGDF wall panel
The back of the Range Cooker must
be accessible.
Fit the wall panel before installing the
anti-tip device and connecting of the
Range Cooker.
Loosen the screws of the edge
profile.
Pull back the edge profile slightly until
it can be removed.
The wall panel is installed in reverse
order.
RBS backsplash panel
The backsplash panel is designed for
connecting to a Miele Range Hood.
Please observe the installation
instructions supplied with the Range
Hood.
Features
17
Advertisement
Table of Contents
