Model numbers
A list of the models described in these
operating instructions can be found on
the back page.
Data plate
The data plate is located behind the
plinth cover. The plinth cover is
attached to the plinth of the Range
Cooker by magnets so it can be
removed and put back again easily.
The data plate states the model number
of your Range Cooker, the serial
number as well as connection data
(voltage, frequency and maximum rated
load).
Please have this information to hand,
should you need to contact Miele
regarding any questions or problems.
Distance to the Range Hood
The minimum safety distance specified
by the manufacturer of the cooker hood
must be maintained between the
appliance and the cooker hood above
it.
If the cooker hood manufacturer's
instructions are not available or if
combustible objects are installed above
the appliance (e.g., cabinets, utensil rail,
etc.), a minimum safety distance of
760 mm must be maintained.
If there is more than one appliance
installed below the Range Hood, each
with a different safety clearance, the
largest clearance must be used.
Features
15