Advertisement
DAILY MAINTENANCE
TO BE CARRIED OUT BY INSTRUCTED SURGERY STAFF
CHECK FOR ANY ALARMS ON THE DISPLAY
SEE ALARMS DESCRIPTION BELOW
Before carrying out any daily maintenance check the display on the keypad for your unit for any
possible alarms.
These alarms will indicate any issues such as the Amalgam level and any temperature faults.
Alarm Information:
CODE
ID
DESCRIPTION
I14
2
Amalgam level > 95%
I15
3
Amalgam level > 100%
I04
36
Over temperature (temperature has
exceeded max. allowed limit)
GENERAL OBSERVATION
Ensure the area around the suction system is clean and clear of debris that may affect ventilation. Check
the display on the keypad for any error messages or warnings and report as necessary. Check for any signs
of fluid leaks or damaged hoses and if suspect, report to your equipment service technician.
SOLUTION
Replace the amalgam container
as soon as possible
Replace the amalgam container
Ventilate the plant room
(check the control panel cooling fan)
Advertisement
