Maintenance; Recommended Maintenance Schedule(S); Maintenance Safety - Toro HoverPro 400 Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
Before each use or daily
After each use
Every 100 hours
Before storage
Yearly

Maintenance Safety

•
Disconnect the spark-plug wire from the spark plug
before performing any maintenance procedure.
•
Wear gloves and eye protection when servicing
the machine.
•
Never tamper with safety devices. Check their
proper operation regularly.
•
Tipping the machine may cause the fuel to leak.
Fuel is flammable and explosive, and can cause
personal injury. Run the engine dry or remove the
fuel with a hand pump; never siphon the fuel.
•
To ensure optimum performance of the machine,
use only genuine Toro replacement parts and
accessories. Replacement parts and accessories
made by other manufacturers could be dangerous,
and such use could void the product warranty.
Maintenance Procedure
• Ensure that the engine shuts off within 7 seconds after releasing the
operator-presence control.
• Clean grass clippings and dirt from the entire machine.
• Service the spark plug and replace it if necessary.
• Empty the fuel tank before repairs as directed and before annual storage.
• Clean the cooling system; remove grass clippings, debris, or dirt from the engine
air cooling fins and starter. Clean the system more frequently in dirty or high-chaff
conditions.
• Service the air filter; service it more frequently in dusty operating conditions.
• Change the engine oil.
• Replace the cutting line.
14