Adjusting The Handle Position; Shutting Off The Engine - Toro HoverPro 400 Operator's Manual

Adjusting the Handle
Position
Refer to Figure 15 for the different handle positions.
1. Hanging storage/transport position
2. Lower working position
3. Upper working position
Note:
For the proper storage procedure, refer to
Storage (page 18).

Shutting Off the Engine

Service Interval: Before each use or daily
To shut off the engine, release the operator-presence
control (Figure 16).
Important:
When you release the
operator-presence control, the engine
should shut off and the cutting line should stop
within 7 seconds. If they do not stop properly,
stop using your machine immediately and contact
an Authorized Service Dealer.
Figure 15
4. Storage/transport position
5. Service position
12
Figure 16
g025627
g017546