CHAPTER -6: SWITCHING ON THE MACHINE AND SELECTING A
You can follow the progress by the help of the programme follow-up symbols on the display.( 22 - a,b,c,d).
As the washing proceeds, the Washing and Drying symbols will be illuminated respectively . When the drying
symbol is on, the machine will remain silent for about 40-50 minutes.
Do not open the door before the completion indicator light is on. When the programme ends, the Completion
indicator light is illuminated.
When the programme you have selected starts, you may see the estimated remaining time in the time indicator.
PLEASE NOTE: A few minutes after the programme finishes and the Completion lamp is illuminated,you may
open the door slightly and leave it ajar in order for the drying process to be faster.
PLEASE NOTE: If the machine door is opened or a power failure occurs during washing, the machine will proceed
from where it stopped after the door is closed or power is restored.
PLEASE NOTE: If a power cut occurs or if the door is opened during drying, the programme will end. The machine
will be ready for selecting a new programme.
PLEASE NOTE: Your machine performs the water softening process in accordance with the mains water
hardness. For this reason, in some washes, the remaining time near the end may be different from that indicated
in the beginning. The total time of the programme also depends on the room temperature, power supply water
temperature and the amount of dishes.