CHAPTER -4: PREPARING THE MACHINE FOR USE
Adjusting salt consumption
Adjust the water hardness setting of your machine according to the level specified on the test strip.
NOTE: The hardness level is adjusted to level 3 as a factory setting.
Adjust the water hardness setting of your machine according to the level specified on the test track.
Open the menu to change water hardness. In order to open the menu settings,hold the option and delay buttons
for 3 seconds. The display will read:
to hold the button. When this number reaches zero, you will see the
After entering the menu, select
be similar to the following values : L01,L02,L03,L04,L05,L06.
Then, press the confirmation button (3), the
selection buttons. Press the confirmation button ( 3 ) to save the settings; the expression
Your settings will be saved and the display automatically returns to the water hardness setting menu.
In order to exit the menu, you may hold the option and delay buttons for 3 seconds like you did when entering the
menu or you may select the seventh row
Use a detergent specifically designed for use in domestic dishwashers. You can find powder,gel,and tablet de-
tergents in the market that have been designed for household dishwashers. Detergent should be put into the
compartment prior to starting the machine. Keep your detergents in cool, dry places out of reach of your children.
Do not fill detergent into the detergent compartment more than required; otherwise it may cause scratches on
your glasses as well as lead to a poorly dissolved detergent. Should you need more information concerning the
detergent you will use, contact detergent manufacturers directly.
Filling the detergent compartment
Push the latch to open the detergent container as shown in the image. 1 Detergent pod has level lines inside.
Detergent pod can take a total of 40 cm3 detergent. Open the dishwasher detergent and pour into the larger com-
partment b 25 cm3 if dishes are heavily soiled or less 15 cm3. 2 If dishes have been kept dirty for a very long time ,
dried food wastes on them or overly loaded the dishwasher, pour a 5cm 3 detergent into the prewash compartment
and start machine. You may have to add more detergent into your machine, depending on the degree of soil and
on the water hardness level in your area.
("Keep Pressing .. X")
"2. Water Hardness: X"
2. Water Hardness: X
value will start flashing. Select the desired value by using up/down
( 8. Exit Menu )
Hardness Level Indicator
L1 is seen on display.
L2 is seen on display.
L3 is seen on display.
L4 is seen on display.
L5 is seen on display.
L6 is seen on display.
to let you know for how many more seconds you have
by using up/down selection buttons. The number
in the menu with the confirmation button.
on the display.
" X "
will appear on