CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
Switching on the machine
Program follow-up
You can follow the program flow using the program follow-up lamps located on the control panel.
Do not open the cover before
the finished lamp is on.
Changing a programme
If you would like to change programs while a washing program is continuing.
Press the power Start/
Pause key once.
The lamp on Program Start/Pause
key goes off once the Program
starts and the washing light not
lamp is highlighted.
Once the Power On/Off key
is pressed, the light not
lamp Power Start/Pause is
highlighted.
Once the program is over, the
finished lamp is illuminated.
After the program stops,
select your desired program
via the Program selector
button.
1
2
You can choose an
3
additional function if you
wish.
Start the program pressing the
4
4
4.
Power Start/Pause key.
As long as Washing and Drying goes
on the Washing/Drying light not
lamp stays lit .When drying is active
machine stays silent about 40-50
minutes.
1
4.
4
Start the program you have
newly selected by pressing
again the Start/Pause key.
EN-23
Press the Power On/Off key.
Select the program suiting
your dishes via the Program
Selector button.
The new program started
will resume the course of
the old program.