Maintenance and Care
Change Oil Filter Element
1. Unscrew oil filter cover
filter insert
3
and then remove.
2. Remove oil filter insert
1
filter cover
.
3. Clean oil filter cover
1
4. Fit new O-ring
2
on oil filter cover
5. Insert new oil filter insert
1
.
6. Insert oil filter cover
1
into the oil module and then tighten.
Tightening torque
. . . . . . . . . . . . . . . . . .
76
1
with O-ring
2
and oil
3
and O-ring
2
from oil
.
1
.
3
into oil filter cover
with oil filter insert
3
40-50 Nm
Carefully read these Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.