Avaya G600 Quick Start Manual page 6

2a
Administering the Existing System (CSI)
For complete information on performing these tasks, see Migrating to an Avaya S8400 Media Server in
Upgrading, Migrating and Converting Media Servers and Gateways, 03-300412.
Task
Connect to the processor
Remove the Netcon
data modules
Verify the system status
Record all busyouts
Note the node names
and IP addresses
Save the translations
6 Quick Start for Hardware Migration: S8400 Media Server in a CMC1 or G600 Media Gateway
1. 192.11.13.6
1. list data module
2. list user ext user
3. change hunt-group hunt group number
4. remove data-module extension
1. list configuration all
2. list trunk-group
3. list hunt-group
1. display errors
1. display ip-interfaces
2. list node-names
1. save translation
Command