Advertisement
Quick Links
GUIDELINES
FOR UNIT
INSTALLATION
141082
GT-4260 R
GT-4260 L (shown)
141083
GT-60
These guidelines are recommended by
Aker Plastics Company Inc. (hereafter
"MAAX") for the proper installation of their
product. A careful review of these procedures
(and any referenced publications) before
starting is important in avoiding unnecessary
problems resulting in an improper assembly
or installation.
NOTE: All drawings in this publication are
typical, and may appear different than the
actual items being installed. In addition,
optional items may be shown on the units
which may not have been ordered on the
unit being installed.
ON WHIRLPOOL EQUIPPED MODELS,
A SEPARATE SET OF INSTRUCTIONS
IS PACKED WITH THE UNIT FOR THE
WHIRLPOOL SYSTEM. READ THEM
BEFORE INSTALLING UNIT!
WARNING!
NEVER LIFT OR HANDLE WHIRLPOOL
BY SYSTEM PIPING AT ANY TIME.
LIFTING THE UNIT BY THE PIPING CAN
CAUSE SYSTEM DAMAGE.
Special Notes to Installer
ÜIt is the sole responsibility of the installer
to determine, prior to the installation, the
requirements necessary for compliance
with all codes involving the unit or the
installation!
ÜAll paperwork packaged with the unit and
any associated options or accessories
should be saved and presented to the
homeowner upon completion of the
installation!
ÜHANDLE THE UNIT BY THE SHELL
ONLY! Never lift any unit by attachments
or piping on the shell.
ÜAll published unit dimensions are for
reference only. Any critical dimensions
required for installation should be taken
directly from the unit being installed!
ÜAny independent changes made to the
unit (or to any options and accessories
supplied with the unit) beyond those
required for normal installation can void
all warranties! (Refer to warranties for
further information.)
Alcove-Style (Flanged) Bath Modules
141082
GT-4260
141482
GT-4260AP with access panel
Inspection Guidelines
A careful check of the unit should be
conducted upon receipt. Notify your supplier
immediately if any questions or problems are
encountered during this process.
DO NOT INSTALL ANY UNIT
WITHOUT FIRST ADDRESSING
QUESTIONS WHICH ARISE DURING
THE INSPECTION!
Basic Module Check
ü Check that the unit drain corresponds to
the bathroom drain location.
ü Check for unit surface damage.
ü Check unit color for coordination to
other bathroom fixtures.
ü Check
for
accessories.
Whirlpool and Accessories Check
An individual system check list is included
in the assembly and operational guidelines
packaged with whirlpool equipped models
and various accessories. Refer to the listed
publications for further information before
continuing.
Page 1
proper
options
and
10023034
Advertisement
Related Manuals for MAAX AKER Series
Summary of Contents for MAAX AKER Series
- Page 1 Aker Plastics Company Inc. (hereafter ÜIt is the sole responsibility of the installer A careful check of the unit should be “MAAX”) for the proper installation of their to determine, prior to the installation, the conducted upon receipt. Notify your supplier product.
- Page 2 Page 2 GUIDELINES FOR UNIT INSTALLATION Unit Data and Dimensional Guidelines (Tolerance: +0/ -3/8 inch) Ø 2-1/2" Overflow 11-1/4" 19-1/4" Ø 2-1/2" Overflow Ø 2" Drain 40-1/2" 40-1/2" 42" Ø 2" Drain 42" 29-1/4" 21-1/4" 1-1/2" 1-1/2" 9-1/2" 50-1/2" 30" 30"...
-
Page 3: Framing Requirements
Page 3 GUIDELINES FOR UNIT INSTALLATION Figure 1 - Alcove Framing Guidelines NOTE: Left End Drain Installation Illustrated Drain Cut-Out Drain Cut-Out Fixture 5" Blocks Drain Center Alcove Lenght / Unit Lenght NOTE: Center Drain Installation Illustrated Drain Cut-Out 5" Drain Cut-Out (Left End Drain) Drain Center... - Page 4 Page 4 GUIDELINES FOR UNIT INSTALLATION The unit must also be positioned square in the alcove framework. The use of shim or Figure 2a - Unit filler material behind the fastening flange Installation Confirm Drain Alignment at each framing member may be required Procedure to maintain the unit in the proper position.
- Page 5 Page 5 Page 5 GUIDELINES GUIDELINES FOR UNIT FOR UNIT INSTALLATION INSTALLATION After each use, wipe the excess water • Hard Water Scales: Liquid scale Finishing Guidelines from the unit. This practice will reduce the remover or white vinegar, applied full Furring strips or filler material may be build-up of deposits and help maintain the strength.
-
Page 6: Limited Warranty
Installation of shower doors by an inexperienced person may result in glass breakage and, consequently, cause personal injury or death. MAAX is not liable for any costs, damages or claims resulting from the purchase of products that do not fit through openings or existing structures. MAAX is not liable for any costs, damages or claims resulting from defects that could have been discovered, repaired or avoided by inspection and testing prior to installation.