Programmable functions
The programmable functions are used
to alter the machine's electronics to
suit changing requirements.
Programmable functions can be
altered at any time.
Programming is carried out in 8 steps
(, , ... ) using the sensor
buttons.
Accessing the programming level
Before you begin, ensure the following:
– The washing machine is switched on
(the program selector is pointing to a
wash program).
– The washing machine door is open.
Touch the Start/Stop sensor button
and hold it down during steps –.
Close the washing machine door.
Wait until the Start/Stop sensor button
lights up constantly ...
...and then release the Start/
Stop sensor button.
After approximately 4 seconds, will
light up on the time display.
Choosing and selecting
programmable functions
The number of the programmable
function will appear on the time
display as and a number: e.g. .
Touch the or sensor button to
scroll to the next or previous
programmable function:
70
Programmable functions
Buzzer
Keypad tone
PIN code
Control panel switch-off status
Memory
Water inlet
Additional long prewash –
Normal
Gentle action
Reduce temperature
Maximum rinse level
Suds cooling
Anti-crease action
Low water pressure
Chlorine bleach
Display brightness dimmed
Welcome tone volume
Confirm the selected programmable
function by touching the Start/
Stop sensor button.