Levelling The Machine; Unscrewing And Adjusting The Feet - Miele WWB 020 Operating Instructions Manual

Levelling the machine

The washing machine must stand
perfectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase
electric and water consumption and
may cause the machine to move about.

Unscrewing and adjusting the feet

The four adjustable screw feet are used
to level the washing machine. All four
feet are screwed in when the washer-
dryer is delivered.
 Using the wrench supplied, turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.
Installation and connection
 Use a level to check that the washing
machine is standing level.
 Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the wrench supplied until it sits
firmly up against the housing.

Risk of damage due to
incorrectly aligned washing machine.
There is a danger of the washing
machine moving about if the feet are
not secured.
Turn all four counter nuts for the feet
until they sit firmly up against the
housing. Please also check this for
the feet which did not need
adjustment.
61