Additional Functions; Stop & Go; Recall - Miele KM 6629-1 Operating And Installation Instructions

With induction
Hide thumbs Also See for KM 6629-1:
Table of Contents

Advertisement

Stop & Go
When Stop & Go is activated, the power
of all cooking zones in use is reduced to
power level 1.
The cooking zone power levels and the
timer settings cannot be altered; the
hob can only be switched off. The
minute minder, switch-off, booster and
AutoBoost times continue to run.
When Stop & Go is deactivated, the
cooking zones will continue to operate
at the power/frying level previously se-
lected.
If the function is not deactivated within
1 hour, the hob will switch off.
Activating/Deactivating
 Touch the  sensor control.

Additional functions

Recall

If the hob is switched off by mistake
during use, this function can be used to
reset all settings. For this to work, the
hob must be switched on again within
10 seconds of being switched off.
 Switch the hob on again.
The indicators for the power/frying
levels previously set will flash.
 Press one of the flashing power or
frying level indicators immediately.
All the cooking zones and the timer will
continue to operate using the settings
selected previously.
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km 6639-1Km 6679-1Km 6699-1Km 6669-1Km 6879-1Km 6839-1

Table of Contents