Checklists - Leuze electronic RSL 410 Operating Instructions Manual

Table 1.2:

Table 1.3:
CS
DTM
EDM
FDT
Field pair
DTS
LED
OSSD
PFH
d
PL
Quad
TSS
RES
SIL
State
1.4

Checklists

The checklists serve as a reference for the machine manufacturer or supplier (see chapter 11). They
replace neither testing of the complete machine or system prior to the initial start-up nor their periodic
testing by a competent person. The checklists contain minimum testing requirements. Depending on the
application, other tests may be necessary.
Leuze electronic
Other symbols
Symbol for tips
Text passages with this symbol provide you with further information.
Symbols for action steps
Text passages with this symbol instruct you to perform actions.
Terms and abbreviations
Switching signal from a control
(Controller Signal)
Software device manager of the safety sensor
(Device Type Manager)
Contactor monitoring
(External Device Monitoring)
Software frame for management of device managers (DTM)
(Field Device Tool)
A protective field with an associated warning field
Driverless Transportation System
LED, display element in the safety sensor
(Light Emitting Diode)
Safety-related switching output
(Output Signal Switching Device)
Probability of dangerous Failure per Hour
Performance Level
Two field pairs (four fields) that are monitored simultaneously in four field mode
Transverse Side-tracking Skate
Start/REStart interlock
Safety Integrity Level
ON: device intact, OSSDs switched on
OFF: device intact, OSSDs switched off
Locking: device, connection or control/operation faulty, OSSDs switched off
(lock-out)
RSL 410
About this document
7