Spectra Logic 2K User Manual page 58

Spectra logic spectra 2k library pn 90870782 rev e user guide

Hide thumbs Also See for 2K:

Table of Contents

Caring for the Library

For a lifetime of reliable performance from your library, disconnect the power to the

library and perform an annual inspection of the internal components.

• Use compressed air to clean out the slots in the DCM(s).

• Use compressed air to clean out the inventory sensors on the robotic tape picker

(Figure 7-2).

• Use a soft cloth to clean the bar code scanner window on the robotic tape picker

(Figure 7-2).

• With power to the library disconnected, open the rear access panel and use

compressed air to clean out the area behind the drives.

Inventory sensors

Figure 7-2 Robotic tape picker (shown removed for clarity).

Chapter 7. Maintenance, Troubleshooting, and Repairs

LED (front)

Picker jaws (rear)

Bar code reader

Table of Contents

Troubleshooting

Do you have a question about the 2K and is the answer not in the manual?