Spectra Logic 2K User Manual page 53

Spectra logic spectra 2k library pn 90870782 rev e user guide

Hide thumbs Also See for 2K:

Table of Contents

4. Shut the door, open it for less than two seconds, then close it. The library loads

the first cartridge into Drive 1.

5. Issue a command over the SCSI bus. The library stacker mode cycles through

cartridges as they are filled with data until the command completes or the

stacker runs out of unused data cartridges.

Note:

To differentiate between tapes containing data and unused tapes,

always insert the DCM in the library with the top slot empty. This

way, once the store completes, an empty slot separates the tapes

with data from the tapes not used (see the diagrams on page 50).

Chapter 6. Library Stacker Mode

Table of Contents

Troubleshooting

Do you have a question about the 2K and is the answer not in the manual?