Jeep Compass Operating Information Manual page 99

LIGHTS
Multifunction Lever
The multifunction lever controls the operation of
the headlights, position lights, side marker
lights, turn signals, headlight beam selection,
instrument panel light dimming, interior lights,
the passing lights and fog lights. The lever is
located on the left side of the steering column.
Multifunction Lever
Headlights And Position Lights
Turn the end of the multifunction lever to the first
detent to activate position lights. Turn to the
second detent for headlight operation.
Head Light Control
Lights-On Reminder
If the headlights or position lights are on after
the ignition is turned OFF, a chime will sound to
alert the driver when the driver's door is opened.
Front Fog Lights
The front fog light switch is on the
multifunction lever. To activate the front
fog lights, turn on the position lights or
the high/low beam headlights and pull
out the end of the multifunction lever.
Front Fog Light Control
Rear Fog Lights
The rear fog lights may be operated
as desired when visibility is poor due
to fog. To activate the rear fog lights,
turn on the Low beam, high beam, or
front fog lamps, pull out the end of the
multifunction lever and rotate the lever to the
last detent.
Turn Signals
Move the multifunction lever up or down and the
arrows on each side of the instrument cluster
flash to show proper operation of the front and
rear turn signal lights.
95