Jeep Compass Operating Information Manual page 72

Uconnect® Phone Button
The radio or steering wheel con-
trols (if equipped) will contain the
two control buttons (Uconnect®
Phone button and Voice Com-
mand button) that will enable
you to access the system. When you press the
button you will hear the word Uconnect® fol-
lowed by a BEEP. The beep is your signal to
give a command.
Voice Command Button
Actual button location may vary
with the radio. The individual but-
tons are described in the "Opera-
tion" section.
The Uconnect® Phone can be
used with any Hands-Free Profile certified
Bluetooth® mobile phone. See the Uconnect®
website for supported phones. Refer to your
mobile service provider or the phone manufac-
turer for details.
The Uconnect® Phone is fully integrated with
the vehicle's audio system. The volume of the
Uconnect® Phone can be adjusted either from
68
the radio volume control knob or from the
steering wheel radio control (right switch), if so
equipped.
The radio display will be used for visual prompts
from the Uconnect® Phone such as "CELL" or
caller ID on certain radios.
Operation
Voice commands can be used to operate the
Uconnect® Phone and to navigate through the
Uconnect® Phone menu structure. Voice com-
mands are required after most Uconnect®
Phone prompts. You will be prompted for a
specific command and then guided through the
available options.
• Prior to giving a voice command, one must
wait for the beep, which follows the "Ready"
prompt or another prompt.
• For certain operations, compound com-
mands can be used. For example, instead of
saying "Setup" and then "Pair a Device", the
following compound command can be said:
"Pair a Bluetooth® Device".
• For each feature explanation in this section,
only the compound form of the voice com-
mand is given. You can also break the com-
mands into parts and say each part of the
command when you are asked for it. For
example, you can use the compound form
voice command "Phonebook New Entry", or
you can break the compound form command
into two voice commands: "Phonebook" and
"New Entry". Please
Uconnect® Phone works best when you talk
in a normal conversational tone, as if speak-
ing to someone sitting a few feet/meters
away from you.
Voice Command Tree
Refer to "Voice Tree" in this section.
Help Command
If you need assistance at any prompt, or if you
want to know your options at any prompt, say
"Help" following the beep. The Uconnect®
Phone will play some of the options at any
prompt if you ask for help.
To activate the Uconnect® Phone, simply press
the button and follow the audible prompts for
directions. Uconnect® Phone sessions begin
with a press of the button on the radio
control head.
remember, the