Connecting An External Synchronization Input; Providing An External Synchronization Output - Alcatel-Lucent 7705 Installation Manual
Service aggregation router
Hide thumbs
Also See for 7705:
- Service manual (546 pages) ,
- Configuration manual (532 pages) ,
- Interface configuration manual (226 pages)
Table of Contents
Advertisement
Making External Synchronization Connections
Connecting an External Synchronization Input
To connect an external synchronization source input to the router:
Step 1.
Step 2.
Providing an External Synchronization Output
To provide an external synchronization source output from the router:
Step 1.
Step 2.
Page 100
For single CSM systems, attach the synchronization cable to the Sync In connector
on the CSM.
For redundant CSM systems, attach the two branch connectors on the Y-cable to the
Sync In connectors on the CSMs
Attach the other end of the synchronization cable to the external synchronization
source.
Attach the synchronization cable to the Sync Out connector on the CSM. In a
redundant CSM system, either Sync Out connector can be used.
Attach the other end of the synchronization cable to the device requiring a
synchronization source.
one connector for each Sync In connector.
—
7705 SAR-8 Installation Guide
- Quick Links:
- Power System
Hide quick links:
Advertisement
Table of Contents
