Using Icare Export To Upload Iop Results From The Icare Home Tonometer - Icare EXPORT TS03 Instruction Manual For Patients

Icare CLINIC, EXPORT and PATIENT Instruction Manual for Patients |
Ticking the Compare periods check box when the chart type Line is displayed, allows the user to
select two sub-periods from the displayed chart and compare the periods to each other one eye at
a time. The sub-periods are selected by painting the displayed chart.
Clicking on the SHOW TABLE button below the graph opens a list of all the measurements on the
graph. The entire report can be printed or saved as PDF file by clicking the PRINT button on the
report. Click the SHOW TABLE button to open and display the measurement list below the graph.
4.5 Using Icare EXPORT to upload IOP results from the Icare HOME
tonometer
Once you have made some measurements, perform the following steps:
1. Connect the Icare HOME tonometer to the PC using a USB cable. Icare EXPORT starts
up when the tonometer is connected.
2. Successful uploading is confirmed by Icare EXPORT with Measurements saved!
a. NOTE!
CLINIC. Icare EXPORT does not send the results to Icare CLINIC in the Local
mode. The mode can be set via the configuration menu in the lower right-
hand side of the user interface.
www.icarefinland.com
Compare periods
By default, Icare EXPORT uploads the measurement results to Icare
ENGLISH
19