Table of Contents
Advertisement
Using the DWA-01D/F01D Wireless
Adapter
Attaching the receiver to the DWA-01D/F01D wireless
adapter allows them to be used as a portable wireless
receiver.
For details, refer to the operating instructions supplied
with the adapter.
Setting the Receiving
Channel
The receiver provides groups of channels for interference-
free transmission. When using multiple wireless
microphones and transmitters (simultaneous multi-
channel operations) within the same area, selecting the
same group and using a channel within that group can
prevent signal interference.
Selecting the Frequency Band /
Group / Channel
Set the frequency band (BAND), group (GP), and channel
(CH) as follows.
For details on the groups and channels included in each
frequency band, refer to "Sony Digital Wireless
Microphone System Frequency Lists" on the supplied CD-
ROM.
For details on menu operations, see "Basic Menu
Operations" on page 11.
1
Press the MENU SELECT button repeatedly until the
RX1/RX2 menu is displayed.
2
Press the + or – button repeatedly until the BAND
screen is displayed.
3
Hold down the SET button until the item to be set
flashes.
4
Press the + or – button repeatedly to select a frequency
band.
5
Press the SET button to confirm the selection.
6
Press the + or – button repeatedly until the GP/CH
screen is displayed.
7
Hold down the SET button until the item to be set
flashes.
8
Press the + or – button repeatedly to select a group.
9
Press the SET button to confirm the selection.
6
Advertisement
Table of Contents
