Preparation; Attaching To A Camcorder - Sony DWR-S02DN Operating Instructions Manual

Digital wireless receiver
Table of Contents

Advertisement

C Peak indicator
Warns of excessive input by lighting up when the signal is
3 dB below the level at which distortion begins.
D Battery indication
Based on metadata from the transmitter, shows the
transmitter's battery condition according to 8 level
indications.
Replace both batteries when the battery indication starts to
flash.
For details on how to change the batteries on the
transmitter, refer to the operating instructions supplied
with the transmitter.
E Signal quality level meter
Indicates the quality of the RF signal reception.
The occurrence of many data errors during a given interval
reduces the height of the bar graph.
This meter allows you to monitor signal deterioration that
may occur when there is noise or when the transmitter is
too far from the receiver.
F RF level meter
Indicates the RF input level. The number of segments that
light up depends on the input level.
When the squelch function is set, the squelch level is
indicated on the RF level meter.
When the RF input level drops below the squelch level, the
output signal is muted.

Preparation

Attaching to a Camcorder

This receiver can be inserted into a slot provided on
compatible Sony camcorders.
The audio signal, which is converted to digital by the
digital wireless transmitter, can be recorded as is to the
camcorder, allowing you to create a fully digital system.
1
Remove the cover from the slot for the wireless
receiver on the camcorder, and insert the receiver into
the slot.
To avoid inserting the receiver in the wrong direction,
confirm the location of the mounting screws and
compatibility pin before inserting the wireless
receiver.
2
After inserting the receiver completely into slot,
securely fasten the four mounting screws.
Receiver
For details about operating the camcorder with the
receiver, refer to the operating instructions supplied with
the camcorder.
Note
If the camcorder is not compatible with the receiver, the
compatibility pin on the receiver will make it impossible to
insert the receiver into the slot.
For details on compatible camcorders, consult a Sony
sales representative.
5

Advertisement

Table of Contents
loading

Table of Contents