Parts Identification - Sony DWR-S02DN Operating Instructions Manual

Parts Identification

a Antenna and antenna connector (BNC type)
Connect the supplied antenna here.
b Mounting screw
Use to attach the receiver to a camcorder or DWA-01D/
F01D wireless adapter.
c Compatibility pin
Prevents the attachment of an incompatible camcorder or
adapter.
d Accessory connector
Use to connect the receiver to a camcorder or DWA-01D/
F01D wireless adapter. Power, audio, and control signals
are sent through this connector.
e POWER indicator
Lights up green when the power is on.
The POWER1 and POWER2 indicators indicate the power
status of tuner 1 and tuner 2, respectively.
f USB connector
Connecting an optional keyboard to this connector allows
menu operation to be performed on the keyboard.
Connecting the transmitter to this connector through the
supplied USB cable allows an encryption key to be
exchanged with the transmitter.
For details on the use of a USB keyboard, see "Using a
USB Keyboard" on page 10.
For details on encryption key exchange, see "Using the
Encrypted Transmission Function" on page 8.
g RF (radio frequency) indicators
Indicate the RF input level of tuner 1 and tuner 2.
The indicators that light up depend on the RF squelch
function setting as follows:
When the RF (radio frequency) squelch level is set to
OFF:
On in green: 25 dBµ or more
On in red: 20 dBµ to 25 dBµ
Off: Less than 20 dBµ
When the RF (radio frequency) squelch level is set to 20
dBµ:
On in green: 30 dBµ or more
On in red: 20 dBµ to 30 dBµ
Off: Less than 20 dBµ
h POWER switches
Turn tuner 1 and tuner 2 on or off individually.
i MENU SELECT (menu selection) button
Selects the displayed menu.
j SET button
Changes the item to be set or enters the selected function
or parameter value.
k + or – button
Use to select a function or value.
If you set the POWER switch on tuner 1 or tuner 2 to ON
while holding down the + button, the tuner that you turned
ON will begin the scanning operation of the clear channel
scan function.
If you set the POWER switch on tuner 1 or tuner 2 to ON
while holding down the – button, the tuner that you turned
ON will begin the pairing operation of the wireless remote
control function.
l Display section
Meter display
A Audio input level meter
Indicates the input signal level.
B Reference level gage
Indicates the reference input level.
–58 dBu (–60 dBV) is indicated when the input level is set
to "MIC" on the transmitter, and +4 dBu when the input
level is set to line.
4