Menu hierarchy
MENU SELECT
UTILITY
Meter indication
AES/EBU LVL@MIC
SYNC SOURCE
WORD SYNC 75ohm
ANALOG OUTPUT 1
TIME
BRIGHTNESS
DIMMER MODE
FACTORY PRESET
VERSION
RX1
GP/CH
BAND
ACT CH SCAN
CLR CH SCAN
RF SQUELCH
ENCRYPTION
CODEC MODE
SYSTEM DELAY
TX1
NAME
RF POWER
INPUT LEVEL
LCF
POWER SAVE
TIME
+48V
RF REMOTE
RX2
GP/CH
BAND
ACT CH SCAN
CLR CH SCAN
RF SQUELCH
ENCRYPTION
CODEC MODE
SYSTEM DELAY
TX2
NAME
RF POWER
INPUT LEVEL
LCF
POWER SAVE
TIME
+48V
RF REMOTE
To UTILITY menu
Basic Menu Operations
Menu name
Item to be set
1
Press the MENU SELECT button repeatedly to select
the menu.
Each time you press the MENU SELECT button, the
menu changes in the following order:
UTILITY, RX1, TX1, RX2, TX2, UTILITY
2
Press the + or – button repeatedly until the function to
be set appears.
Each time you press the + or – button, the item to be
set changes.
For details, see "Menu hierarchy" on page 11.
3
Hold down the SET button until the item to be set
flashes.
4
Press the + or – button to change the setting.
5
Press the SET button to enter the setting.
Note
When the tuner is turned off, the menus corresponding to
that tuner are not displayed.
11
Function name