Main Components; Tool List; Information For Fitting The Cot Ends; Mattress Height Mark - Mamas & Papas Amelia Instructions For Use Manual

C1
C6
C5
Item Description
C1 Head end
C2 Fixed-side
C3 Foot end
Mattress height mark & base fitting holes.

MAIN COMPONENTS

Qty.
1
1
1

TOOL LIST

INFORMATION FOR FITTING THE COT ENDS

Mattress height mark

The line engraved on the
inside face of the head end
is for safety reasons (see
instructions for safe use).
Base fitting holes
The three holes for the
height positions of the base
are closer to one side of the
legs edge. This closest edge
must face into the cot.
C2
C4
C6
Item Description
C4 Base
C5 Drop-side
C6 Drop-side runners
Flat-head screwdriver
To fit: F3.
Fixed-side or drop-side?
– 3 –
C3
Qty.
1
1
2