Mamas & Papas Amelia Instructions For Use Manual page 6

FITTINGS
F7 / Middle
guides x 2
F2 /
Short assembly screws x 2
Step 5
Attach the two middle guides
(F7), (these have a hole going
through them) to the middle
hole in each cot ends by
pushing two short assembly
screws (F2) through the
holes, then screw them into
the guides using the allen key
(F10).
The holes through the guides
must face upwards (see
diagram).
FITTINGS
Step 6
Please note: Fit the drop-
side with the plastic teething
rail at the top.
Align the holes in the ends of
the top and bottom rail on
the drop- side (C5) with the
holes in the guides.
Slide the drop-side rods (C6)
through the holes in the rails
and middle guides.
The ends of the rods rest in
the recess in the top of the
bottom guides.
F2
F10
C6
C5
– 6 –
F7