Mamas & Papas Amelia Instructions For Use Manual page 5

FITTINGS
F5 / Base bracket nuts x 4
Step 3
Attach the base (C4) (with
the information label facing
upwards) by lowering the
base onto the base brackets
so that the threaded ends of
the base brackets fit into the
holes in the ends of the
base's rails.
Push the base bracket nuts
(F5) into the holes in the
corners of the base and screw
them onto the threaded ends
of the base brackets using the
allen key (F10).
FITTINGS
F6 / Bottom
guides x 2
F2 /
Short assembly screws x 2
Step 4
Please note: The guides
must always be fitted on the
inside face of both cot ends
(see diagram).
Attach the two bottom
guides (F6) to the two
bottom holes in the cot ends
by pushing two short
assembly screws (F2) through
the holes, then screw them
into the guides Using the
allen key (F10).
The recess in the top of the
guides must face upwards
(see diagram).
F10
F2
F10
– 5 –
F5
C4
F6