eXact PipeCut 360 System User Manual page 12

Environment, guarantee
Blade
Check the condition of the blade. Replace a bent,
blunt, or otherwise damaged blade with a new one.
Using a blunt blade can overload the pipe saw's
electric motor. When you notice that the blade is
blunt, do not continue sawing with it, as the blade
may become so badly damaged that it will not be
worth sharpening. A blade in sufficiently good
condition can be sharpened a few times by a
professional sharpening company. Use only Exact-
blades.
Gripper unit
Clean the gripper unit regularly with compressed
air. Lubricate the gripper's wheel axles (Fig. P/1)
and its joints (Fig. P/2). Also clean and lubricate the
gripper's trapezoidal screw (Fig. P/3) and the two
worm screws on it (Fig. P/4).
Blade guard
When you have sawn plastic pipes and then intend
to start sawing metal pipes always clean the inside
of the blade guards. Hot particles derived from
sawing metal will burn plastic particles, which may
release toxic smoke. Make it a rule to clean the
blade guard regularly, and pay special attention to
keep the moving blade guard movement from
becoming hampered. Lubricate the axis of the moving
blade guard regularly.
Motor
Keep the motors cooling vents clean.
Plastic parts
Clean the plastic parts with a soft rag. Only use mild
detergents. Do not use solvents or other strong
detergents as they may damage the plastic parts
and paint surfaces.
Power cable
Check the condition of the power cable regularly. A
faulty power cable should always be replaced at an
approved service agency.
Correct use and regular servicing and cleaning will
ensure the continued operation of the pipe saw.
Environment
Separate collection. This product must not
be disposed of with normal household
waste. When your Exact PipeCut 200
machine is worn out, do not dispose of it
with normal household waste. This product
must be recycled separately. Separate
recycling of used products and packaging
facilitate recycling and recovery of
materials. Reusing of recycled materials helps
prevent pollution of environment. According to local
regulations it is possible to deliver household
appliances to municipal rubbish depositories or to
the dealer when buying a new product.
Guarantee
If the Exact PipeCut 200 pipe saw becomes unusable
due to material or manufacturing faults within 24
months of the date of purchase, we will replace the
damaged parts with new ones or supply an entirely
new or factory-reconditioned pipe saw to replace
the damaged one.
The guarantee is only valid if:
The guarantee card or a dated purchase receipt is
returned to the manufacturer or retailer.
The pipe saw has not been misused.
No attempt has been made by non-approved persons
to repair the saw.
The pipe saw has been used in accordance with
these operating, safety, and servicing instructions.
The guarantee does not apply to blades or the
overload protection.
Due to continuous product development, the
information in this instruction book may change.
We do not give separate notification of changes.
12