Panasonic KX-TGP500B04 Service Manual page 35

8.2.4. How to Login to Panasonic Administrator Menu
Connections:
1. Power on the unit and set the fixed IP address.
1-1. Plug the Base unit's AC adaptor.
1-2. Insert battery in Handset.
1-3. Using phone user interface, confirm the following settings and write them down.
DHCP
IP settings (IP address, Subnet mask, Default gateway, DNS1,DNS2)
These settings must be restored later.
1-4. Using phone user interface, set the parameter as follows.
DHCP : Off
IP address : 192.168.0.241
Subnet mask : 255.255.255.0
2. Connect the LAN/Ethernet port on Base unit to the LAN port on your PC for configuration with Ethernet (LAN) cable.
3. Turn on the PC.
4. Start "Internet Explorer" on your PC.
35
KX-TGP500B04/KX-TPA50B04