Table of Contents
Advertisement
4.4 Disassembly procedures（A+D monitor）:
S1
Opening the carton with the proper tools after tearing the adhesive tape. Take out base unit,neck unit and
all accessories include power core,signal cable,guarantee card,adapter cable and other packing materials
from the carton.(It depends on whether users return the accessories)
S2
1:
Taking out the whole EPS cushion that are EPS-top and EPS-bottom from
Carton.
2:
Afterward taking off the EPE.bag from LCD monitor assembly after removing all EPS from the LCD
monitor assembly.
1:
Because the Neck unit and Base unit already separated from taking out
S3
from carton. So it does not have to disassemble these units.
2:
Preparing the protective cushion to put on working desk and let the
LCD monitor assembly to lie it down.
3:
Using a Phillips-head screwdriver to release the two screws from the Rear
cover in anticlockwise way.
(Screw size = MAC. SCREW-MB M3.0*5.0L,BLK-Ni ,Torque=4±1kgf.cm)
4:
Turning over the LCD monitor assembly to lie on the protective cushion and the
Front Bezel faces top.
5:
Using a proper tool to stretch outside gape of the Monitor. Afterward it is easy to pull
the Front Bezel and let it opened.
6:
Removing the Front Bezel from the Rear Cover.
4. Assembly and Disassembly Procedures
ACER S230HL
40
Go to contents page
Hide quick links:
Advertisement
Table of Contents
