Table of Contents
Advertisement
TABLE OF CONTENTS
Special notes on LCD monitors .................................................. 1
Information for your safety and comfort .................................. 2
Unpacking ................................................................................... 5
Attaching/Removing the base .................................................... 6
Screen position adjustment ........................................................ 6
Connecting the power cord ....................................................... 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC .............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................11
Installation.....................................................................................12
User controls..................................................................................13
Troubleshooting............................................................................19
Advertisement
Table of Contents
Related Manuals for Acer S232HL
Summary of Contents for Acer S232HL
-
Page 1: Table Of Contents
TABLE OF CONTENTS Special notes on LCD monitors ... 1 Information for your safety and comfort ... 2 Unpacking ... 5 Attaching/Removing the base ... 6 Screen position adjustment ... 6 Connecting the power cord ... 7 Safety precaution ... 7 Cleaning your monitor ... -
Page 2: Special Notes On Lcd Monitors
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES · Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. -
Page 3: Information For Your Safety And Comfort
Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. -
Page 4: Product Servicing
Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: •... -
Page 5: Taking Care Of Your Vision
Warning! We do not recommend using the product on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. ----------------------------------------------------------------------------------------------------- For more information and help in recycling, please visit the following websites: Worldwide: http://www.acer-group.com/public/Sustainability/sustainability01.htm http://www.acer-group.com/public/Sustainability/sustainability04.htm EN-4... -
Page 6: Unpacking
UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. · · · LCD Monitor AC Adapter AC Power Cord ·... -
Page 7: Attaching/Removing The Base
Attaching the Base -------------------------------------------------------------------- Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. Attach the the monitor stand arm to the base. Ensure that the base is locked onto the monitor stand arm. -
Page 8: Connecting The Power Cord
CONNECTING THE POWER CORD · Check first to make sure that the power cord you use is the correct type required for your area. · This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. ·... -
Page 9: Power Saving
Power saving The monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. State Light Blue Power Saving Amber Mode The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. -
Page 10: Connector Pin Assignment
CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. DESCRIPTION Monitor Ground DDC-return R-Ground G-Ground B-Ground 24-Pin Color Display Signal Cable* Meaning TMDS Data2- TMDS Data2+ TMDS Data 2/4 Shield DDC Clock DDC Data TMDS Data1- TMDS Data1+ TMDS Data 1/3 Shield * only for certain models PIN NO. -
Page 11: Pin Color Display Signal Cable
19-pin Color Display Signal Cable* PIN No. Description TMDS Data2+ TMDS Data2– TMDS Data1 Shield TMDS Data0+ TMDS Data0– TMDS Clock Shield DDC/CEC Ground Hot Plug Detect * only for certain models PIN No. Description TMDS Data2 Shield TMDS Data1+ TMDS Data1–... -
Page 12: Standard Timing Table
Standard Timing Table Mode VESA SVGA SVGA VESA SXGA WXGA WXGA+ UXGA Resolution 640x480 640x480 66.66 720x400 800x600 800x600 1024x768 1024x768 1152x864 1280x1024 1280x800 1440x900 1920x1080 EN-11... -
Page 13: Installation
INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. Connect the digital cable (only for dual-input models). -
Page 14: User Controls
Press the function button to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. Empowering: Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. AUTO Auto Adjust: Press this button to activate the Auto Adjustment function. -
Page 15: Operation Instructions
Acer eColor Management Operation instructions Step 1: Press “ “ Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press “ “ or “ Step 3: Press “ AUTO “ Key to confirm the mode and exit the eColor menu. -
Page 16: Adjusting The Osd Settings
Adjusting the OSD settings -------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. - Page 17 Adjusting the OSD position 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. EN-16...
-
Page 18: Adjusting The Setting
Adjusting the setting 1 Press the MENU key to bring up the OSD. 2 Using the keys, select the feature you wish to adjust. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings. Setting from the OSD. -
Page 19: Product Information
Product information 1 Press the MENU key to bring up the OSD. 2 Using the keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. EN-18... -
Page 20: Troubleshooting
TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON LED OFF No Picture LED displays amber color Unstable Picture Display is missing, center... - Page 21 DVI/HDMI mode Problems Current Status Remedy LED ON LED OFF No Picture LED displays amber color · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. · Check the power switch. · Check if AC power cord is properly connected to the monitor.
-
Page 22: Declaration Of Conformity
_______________________________ Easy Lai /Manager Regulation, Acer Inc. LCD Monitor Acer S232HL S232HL xxxxxx (“x” = 0~9, a ~ z, or A ~ Z) 0.1% Polybrominated Biphenyls (PBB’s) 0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1% Jun. 29, 2010 Date Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih... -
Page 23: Federal Communications Commission Declaration Of Conformity
Name of Responsible Party: Address of Responsible Party: 333 West San Carlos St. Contact Person: Phone No.: Fax No.: Acer America Corporation 333 West San Carlos St., San Jose LCD Monitor S232HL S232HL xxxxxx (“x” = 0~9, a ~ z, A ~ Z or Blank)
Need help?
Do you have a question about the S232HL and is the answer not in the manual?
Questions and answers
Screen shows acer logo for a split second after blue light turns on, then entire thing shuts off
The issue may be caused by one of the following:
- The video cable is not properly connected to the computer.
- The computer is off or not functioning properly.
- The video cable pins are bent.
- The monitor is not receiving a valid signal from the selected input source.
Check that the video connector is securely connected, the computer is turned on and working, and the video cable and pins are in good condition. Try selecting the correct input source using the INPUT key.
This answer is automatically generated
how do you navigate to the sliders
To navigate to the sliders on the Acer S232HL, follow these steps:
1. Press the MENU key to bring up the OSD (On-Screen Display).
2. Use the / keys to select Picture from the OSD menu.
3. Navigate to the picture element you wish to adjust.
4. Use the / keys to adjust the sliding scales.
This allows adjustment of brightness, contrast, color temperature, auto configuration, and other image-related settings.
This answer is automatically generated