S4
Using the Phillips-head screwdriver to tighten 4 screws to fix Main board on the Panel's UDM (MAC.
SCREW-MB M3.0*5.0L,BLK-Ni,Torque=5±1kgf.cm)
S5
1:
Plugging in connector of Main board(BJ1 conn) and connector of Panel with the
Panel power cable (FFC cable)
2:
Using the two kinds of Acetate cloth tapes to stick the Panel power cable on the Panel (Tape 1:20*45,
Tape 2:12*30mm)
S6
1:
Taking the wire cable to connect the J1 connector of Main board and J1 connector of OSD key board.
2:
Using one Acetate cloth tape to stick wire cable.(ACETATE CLOTH TAPE = 21*61mm)
3:
Putting the OSD key assembly into the hooks of Front Bezel firmly.
※Don't let the wire cable touch the cable of panel.
4. Assembly and Disassembly Procedures
ACER S230HL
26
Go to contents page