27
ACER S230HL
Go to contents page
Assembling Rear Cover with the assembled unit .Pressing the Rear Cover to make the hook structure
S7
assembled well.
S8
Using the Phillips-head screwdriver to tighten bracket of D-sub for fixing on the
Rear Cover with two M3 screws.
(Screw size = MAC. SCREW-MB M3.0*5.0L,BLK-Ni ,Torque=4±1kgf.cm)
S9
1:
Putting the Neck into the holes of Rear Cover's bottom area as red square of area shown.
2:
Pushing the neck as red arrow shown.
4. Assembly and Disassembly Procedures